Cable Extrusion Division

Cable extrusion: a fraction of a millimetre on the sheath is a year's material bill

You cannot cut open a sheath the way you can sample a pipe. Too thick and you are giving material away; too thin and it is a quality failure — and the difference is often a few tenths of a millimetre. This division turns those tenths into numbers the line can see and hold.

Control by the metre The gravimetric system tracks weight per metre live and closes the loop on extruder and haul-off, holding sheath thickness near setpoint — what it saves is the material every drum was quietly carrying.

Plan by the drum Set wound length per drum and the number of drums and the system works out the material to draw; enter the weight already drawn and it tells you how many drums it will make.

Gauge small bores The small-bore ultrasonic system covers Φ2–50mm, measuring sheath wall, diameter and eccentricity without contact — medical tubing included.

The seven systems in this division

Gravimetric Control System · Cable

You cannot sample a sheath the way you can cut a pipe. Run thick and nothing looks wrong — every drum is simply carrying material you gave away. Run t

Gravimetric Masterbatch Control · Cable

Sheath colour is an identification standard, so masterbatch cannot be skimped. But it costs far more than base resin, and over-dosing is money burned.

Gravimetric Masterbatch, Weighing Edition · Cable

The weighing edition adds an independent weighing unit so masterbatch and base resin are each weighed before blending. On cable lines with tight colou

High-Precision Multi-Component Dosing System

Sealion high-precision multi-component dosing: loss-in-weight metering with an independent servo drive and independent weighing on every channel, closed-loop algorithms trimming feed speed live, formulas stored for one-click changeover and fully traceable.

Dual-axis Laser Caliper

Sealion dual-axis laser caliper: dual-axis scanning, non-contact measurement, outer diameter and ovality output live at ±0.001mm accuracy, high-speed in-line, connectable to a PLC. For plastic pipe, cable, metal wire, medical catheter, rod and filament.

Ultrasonic Thickness Online (Small Bore) · Cable

The small-bore system covers Φ2–50mm, measuring sheath wall, outer diameter and eccentricity without contact. Cable, medical tubing and fine bore prod

Cloud-Based Extrusion Monitoring · Cable

Cable plants often run a dozen extrusion lines at once, and no supervisor can stand at every one. This system collects weight per metre, speed, output

Typical industries

Also running pipe lines? Go to the Pipe Extrusion Division

Tell an engineer about your cable spec

Diameter range, sheath material, output and how you wind it — with those we can answer with something that fits.

Talk to an engineer